Minox film cut by a blind hedgehog in a bag
As you all are aware, I do not run camera repairs, on account I have two left hands. This is ok, because I leave more work for those who are …
Acmel film cutter for Minox
Minox 8×11 Film Cutter, as sold by Minox GmbH Germany. Manufactured by Asanuma Camera Mechanical, Laboratory LTD, Tokyo, Japan. This is a tool to slit conventional 35mm films to 9,2mm. …
Zipslit film cutter
Perhaps the newer members of the Minox community do not know the name John Birkby, of FilmTech company in the UK. He invented (and produced) the smallest Minox film cutter, …
Tarroux film cutter
These schematics for a 8×11 film cutter were sent to me by their author, a French fellow Minoxer, Mr. Pierre Tarroux. He devised this quite interesting machine, which cuts 8×11 …
Factory film cutter – 35mm to 9.2mm
I have bought this film cutter somewhere in the beginnings of 2000’s. It was part of larger Minox lot purchased at the time, and it was a valuable addition to …
Film cutter – 35mm to 16mm
Purchased from the same seller (see here), and made in a similar fashion and from the same materials. It cuts 35mm film negative down to 1 x 16mm. Not very …
Film cutter – 35mm to Minox 9.2mm
Bought this from a US seller quite a number of years ago, name of the seller was Xkaes or something (I hope I am not wrong). A good film cutter, …
Film cutter – 35mm to 9.2mm
Made a fellow Minoxer, Jimmy Li, and probably still available (or not). A steel machine, using sharp superimposed rollers for cutting the film negative, from 35mm stock down to 2 …
Film cutter – 16mm to 9.2mm
I do not recall where or of whom I bought this small film cutter, as it came into my collection some 15 yrs ago (or so). Built from acrylic plate, …
MiniMinox film cutter
I have found that a new 8×11 film cutter is present on the market, for a quite a while now it would seem. A simple no non-sense one, by its …