Julian Tanase Photography

My Minox journey continues…

Zorki 1 – a Russian Leica of sorts

Zorki 1 – a Russian Leica of sorts

I was always curious to try out various models of Russian cameras, interested in how bad a camera can get and if I can take our  a decent result out of it. When I started to be interested in photography, mid 80’s, the vast majority of available cameras in Romania were Russian, with a small percentage of German ones (made in the former Democratic Republic of Germany). Western-made cameras were scarce and very few, and of course, as a member of the working class family, I could not afford one, never had the means to own one, could not get to try one on loan. The staple of my early days photography was made by the Russian cameras, in 35mm or 120.

One of the first things about the Russian cameras that I learned was that they are never to be trusted completely. At some point, they froze, flared, skip a frame, get blocked, film winding stuck, shutter speeds setting jumped its lock, glass separated, rangefinder misaligned, and so forth. When they delivered, the image I got was of average quality, and it was not always my fault. I was shooting the film and hoped for the best. One get used to this sort of conditions, you know; in fact, it becomes a whole type of experience, to be honest.

This here Zorki model 1 camera has an interesting story: it belonged to my uncle, who acquired it in 1957 or thereabouts. I do not know if he bought it new in Romania, or was purchased while training in the USSR as a flying corps cadet at that time. He was part of one of the first batches of young communist pilots to fly the new (then) Mikoyan-Gurevich MiG-19 jet fighters.

As the new Romanian military aviation had been given these fighters by their Russian comrades, the training and such was initially made in the USSR and then continued at their respective regiments in Romania. The camera was given to me by the family, in the early 2000’s, after his death. It was in need of a good CLA, being misaligned, speeds erratic, etc. I sent it to a repairer in Russia (go figure), and it was returned in excellent working condition. The vulcanite was removed and leather put instead onto the body, rangefinder repaired, shutter crisp and exact.

As per its serial number, is a 1955 – made camera. As the production of Zorki 1 stopped in 1956, this is a last model (I believe) to be produced in the KMZ factory. The speeds are from B to 500, apertures from 3.5 (yes, not a slow lens) to 16. The lens is of collapsible type, this camera is fitted with the original ИНДУСТАР – Industar 22, a copy of Zeiss Tessar lens, athough it looks very much like a copy of the Elmar. 

Loading the film is similar to that of Leica: detach the bottom plate, have your film leader cut to shape as per Leica style, affix film leader onto the take up spool, insert the whole thing in the camera (careful), and close the bottom plate (make sure the locking key engaged the lock on the bottom).

The required film leader cut for bottom loading cameras is 10 –11 cm long and about 2,5 cm wide. It should taper gently towards the shoulder and no rough corners around the cuts.

Shutter is of cloth type, horizontal traverse focal plane, identical in design with that of Leica II cameras. The rangefinder window is small and many cameras have the focusing yellow dot faded or completely gone. Release button has a threaded port for a cable, in this model of camera (earlier ones need a Leica release cup type, also made by KMZ). The knurled nobs are easy to work with. A lever situated on the left of the winding knob is to be turned to left (to B mark) in order to rewind the film back into the film cassette. A cold shoe for flash attachment has been installed onto the top plate, together with a flash sync socket; not exactly the best solution but it works.

I have found it to be a very easy camera to work with, rather basic but one expects that. Wind the film, cock the shutter choosing your speed, check the aperture (ring around the lens), focus the image by aligning the rangefinder in the first viewfinder, compose your image on the second viewfinder, and press the release button. Easy, as I have said. However, one has to remember to wind the film PRIOR to cocking the shutter/choose the speed, as the opposite action will break the shutter pin upon film winding.

I have never tried this camera with other lens, although I was tempted a couple of times. I love the images it renders, and it seems to me that no matter the film or the subject, this lens gives that 80-ish look to the negatives. It is probably just a fancy, but I do have that impression nonetheless.

I have said somewhere above that the Russian-made cameras are a bit of a hit-or-miss thing, and to add to this, they’re quirky and many times unreliable. Well, that is true, from my experience, but this Zorki 1 is the exception that proves the rule. It just delivers and it can be trusted. No issues with it since it was repaired a long time ago. So yes, this one is a good one. I wish I could day this for every Russian camera I own and use.

Here, a few images taken with this camera, film is Fomapan 200 rated 80, own process and scan, place is somewhere in the Eastern Europe. You get the fun of this, right? Peruse and enjoy, thank you for your visit.

%d bloggers like this: